- Activated carbon fiber organic waste gas adsorption device
- Acid mist treatment
- pp purification tower
- PP activated carbon adsorption tower
- Exhaust gas washing, absorption, purification tower
- PP duct
- FRP fan
- UV photolysis
- RCO catalytic combustion equipment
- Exhaust gas treatment equipment
- Dry paint cabinet
- Fixed oil film spray booth
- Photo oxygen catalytic equipment
- Photooxy Plasma Machine
- Welding smoke purifier
- Activated carbon adsorption box
- Spray tower
- Soft curtain oil film spray paint room
- Water curtain host
- Mobile oil film spray booth
- Mobile Water Curtain Painting Room
- Moving hood
- Hard curtain oil film spray paint room
- Oil film host
contact usContact Us
Changzhou Chaokang Machinery Co., Ltd. Contact: Ge Lei Phone: 18068771880
Factory Address: Anjia Industrial Park, Chunjiang Town, Xinbei District, Changzhou Office Address: Room 1513, Building 4, Tianyu Plaza, Xuejia Town, Xinbei District, Changzhou, Jiangsu
Activated carbon fiber organic waste gas adsorption deviceYour location ： Home > Products > Activated carbon fiber organic waste gas adsorption device
Brand: Chaokang Machinery
Activated carbon fiber treatment of organic waste gas and recovery device is based on the advantages of strong adsorption capacity and high adsorption and desorption speed of activated carbon fiber (ACF) to purify air and recover organic solvents. Activated carbon fiber treated organic waste gas is divided into air inlet, carbon fiber filtration and air outlet sections. Organic waste gas enters the cabinet from the air inlet. The purified exhaust gas is discharged into the atmosphere by the ventilator. reuse. If the organic gas is not recovered and only treated, the device can use low-cost activated carbon as an adsorption material according to specific conditions to treat the exhaust gas.
Organic waste gas is an important pollutant existing in various industries. The treatment methods are: condensation method, direct combustion method, catalytic combustion method, activated carbon adsorption method, absorption liquid absorption method, etc. Activated carbon and carbon fiber adsorption devices have high purification efficiency and easy Regenerative, the equipment covers a small area, is corrosion-resistant, easy to maintain, and does not produce secondary pollution. It is especially suitable for higher concentration exhaust gas purification treatment.
The types of gases for adsorption treatment or recovery are: benzene, toluene, xylene, chlorinated hydrocarbons, ketones, alcohols, ammonia, methyl mercaptan, hydrogen sulfide, dimethyl sulfur, ammonia and other organic solvents. It can also treat various organic waste gas and malodorous gas separately, and is used in the purification of spray mist and welding fume treatment.
Application areas: printing, paint, rubber, plastics, pharmaceuticals, manufacturing and chemicals.
There are two kinds of materials: FRP and engineering plastic composite FRP, which are designed and selected according to specific conditions.
There are two types of equipment: square and round, which are designed and selected according to specific conditions.
Activated carbon fiber treatment organic waste gas treatment equipment is based on the advantages of strong adsorption capacity and high adsorption and desorption speed of activated carbon fiber (ACF) to purify air and recover organic solvents. Activated carbon fiber treatment of organic waste gas is divided into air inlet, carbon fiber filtration and air outlet sections. Organic waste gas enters the cabinet from the air inlet, and the purified exhaust gas is discharged into the atmosphere by a ventilator. The carbon fibers after adsorption and saturation can be regenerated. The regenerated carbon fibers can be regenerated. reuse. If the organic gas is not recovered and only treated, the device can use low-cost activated carbon as an adsorption material according to specific conditions to treat the exhaust gas.
Third, the characteristics of activated carbon adsorption device:
() High organic solvent recovery rate. Through reasonable design and adjustment of switching time, the solvent recovery rate can be above 95%;
(2) The stability of the solvent is good during recovery, and there is very little decomposition;
(3) It has a wide range of applications and can also be applied to low-concentration solvents, polymerizable monomers and high-boiling solvents;
(4) The device is small in size, easy to operate and maintain;
(5) The safety is high, the adsorption heat of the activated carbon fiber is small, and it is easy to dissipate, which will not cause the local temperature to be too high.
This system can be equipped with a gas online analyzer, differential pressure transmitter, pressure sensor, flow sensor, liquid level control meter, solid suspended solids concentration meter, solenoid valve, inverter and control cabinet. The above control conditions are all It is displayed in digital form on the interface of the monitor, so that the management staff can see it at a glance, and there is a fault alarm for easy management and maintenance. The automatic control system can be designed manually, semi-automatically and fully automatically according to user requirements.
Fourth, technical specifications and performance parameters
For detailed technical parameters and selection, design and selection of the company's technical department can be determined.
Because each user needs to deal with different types, concentrations, temperatures, and volumes of exhaust gas, users must first contact our company when selecting, we will help users choose economical, value-for-money equipment.
Five, adsorption material-activated carbon fiber description
Activated carbon fiber is a new type of adsorption material, which has a high adsorption effect on toxic and harmful gases. The adsorption and desorption speed is fast. Carbon fiber should be desorbed with hot air (05 ° C) and can be recycled. It is also resistant to acid and alkali. Corrosion performance, has obvious purification effect on organic waste gas containing benzene series, sulfur dioxide, carbon monoxide, nitrogen oxides, hydrogen sulfide and petroleum gas, foul odor.
You might also be interested in